|
 |
|
MDC5 -
Manual Drum Tongs
[contact us]
Capacity 360kg.
- For lifting 210 Litre open top and tight head steel drums
with L and XL rings. Welded gripping hooks.
- Fitted with 20mm dia steel pin for attaching to overhead
lifting gear or fork lift adaptor beam.
- Weight: 4kg
- Finish: Orange epoxy
|
|
 |
|
MDC6 -
Drum Pincer
[contact us]
Capacity 500kg.
- For lifting 210 Litre open top and tight head steel drums.
- Fitted with 20mm steel pin for attaching to overhead lifting
gear or fork lift adaptor beam.
- The jaw grips climb of drum and the vertical bar keeps the
drum steady. All steel construction.
- Weight: 12kg
- Finish: Orange epoxy
|
|
 |
|
MDC10 -
Horizontal Drum Tongs
[contact us]
Capacity 500kg.
- For lifting 210 Litre open top and tight head steel drums,
using overhead lifting gear or fork lift adaptor beam.
- Weight: 3kg
- Finish: Orange epoxy
|
|
 |
|
MDC9 -
Drum Tines
[contact us]
- Fork truck attachment for transporting 210 litre open top
and tight head drums in the horizontal position.
- Drum tines fit over forks and are secured in position with "T" bar
clamping screws.
- W X L X H: 605 X 1240 X 140
- Fork pocket W X H: 170 X 50
- Fork centres: 380mm
- Weight: 36kg
- Finish: Yellow or Orange epoxy
|
|
 |
|
MDC4 -
Horizontal Drum Tongs
[contact us]
Capacity 500kg.
- For lifting 210 litre tight head steel drums, using overhead
lifting gear or fork lift adaptor beam.
- To operate, set locking lever in locked open position. When
central over the horizontal drum, release locking lever to
allow hooks to fall and locate under both rims. Hooks automatically
engage as drum is lifted and automatically release when drum
is set down.
- Suitable for 210 litre steel drums 760-910mm long.
- Plastic hand grip
- Weight: 9kg
- Finish: Yellow or Orange epoxy
|
|
 |
|
MDC310 -
Adaptor Beam With Swivel Hook [contact
us]
Capacity 1000kg.
- Use your fork lift truck as a mobile crane. Adaptor beam
fitted with forged steel shackle with a swivel hook. Suitable
for use with drum handling attachments and other secure lifting
duties.
- Adaptor beam must be fitted at the load centre as specified
by the fork lift truck manufacturer.
- Fork pocket W X H: 135 X 50
- Fork centres: 500mm
- Weight: 16kg
- Finish: Yellow or Orange epoxy
|
|
 |
|
MDC1 -
210 Litre Drum Clamp
[contact us]
Capacity 500kg.
- Lift 210 litre drums with rolling hoops with the drum clamp
attachment. Clamp fits over forks and is secured with "T" bar
clamping screws.
- The two drum fingers have adjusting bolts complete with lock
nuts fitted to the underside to enable the fingers to be adjusted
parallel.
- W X L X H: 580 X 840 X 110
- Fork pocket W X H: 170 X 50
- Fork centres: 380mm
- Weight: 27kg
- Finish: Yellow or Orange epoxy
|
|
 |
|
MDC2 -
210 Litre Double Drum Clamp [contact
us]
Capacity 1000kg.
- Similar to single drum clamp, but can lift a single or two
210 litre steel drums with rolling hoops.
- Clamp fits over forks of fork truck and is secured with "T" bar
clamping screws.
- W X L X H: 1220 X 1070 X 140
- Fork pocket W X H: 170 X 50
- Fork centres: 380mm
- Weight: 48kg
- Finish: Yellow or Orange epoxy
|
